ATTENTION:  The Ralph Lauren Glazes have been discontinued,  however we have matched the Popular Ralph glaze colors (Tea-stained, Black Silk, Tobacco, Smoke)  into a Benjamin Moore glaze.   Performance and hue is very similar.   We are now substituting the tinted Benjamin Moore glaze in its place. 

FAUX TECHNIQUE GLAZEINTERIOR ACRYLIC RL2420

Product Description
RALPH LAUREN INTERIOR ACRYLIC FAUX TECHNIQUE GLAZE has been
developed for use with Ralph Lauren exclusive fabric techniques; Indigo
Denim, Bright Canvas, Antiqued Leather and Aging as well as other faux
finishes like sponging, ragging and colorwashing.
RALPH LAUREN INTERIOR ACRYLIC FAUX TECHNIQUE GLAZE creates
wonderfully translucent finishes with striking visual depth. A breakthrough in
glaze technology, this acrylic formulation glides on effortlessly and retains
the patterns left by the tools. Use this glaze with the exclusive Ralph
Lauren fabric techniques; Indigo Denim, Bright Canvas, Antiqued Leather
and Aging or other techniques such as sponging, ragging and colorwashing.
Features
Acrylic Translucent Medium
Developed for Use with the Ralph Lauren Decorative Techniques
Creates a Translucent Finish Designed to Evoke the Mellowed Patina of
Time Softened Wallpaper or Paint
Lends Immediate History to a Room
Glides on Effortlessly, Retaining the Patterns Left by the Tools
Recommended For
For interior use on properly prepared surfaces such as ceilings, walls and
trim where a Ralph Lauren technique or faux finish is desired.
Application
Applicators Needed – INDIGO DENIM: Ralph Lauren 7” Denim Weaver, Ralph
Lauren 4” Denim Check Roller. BRIGHT CANVAS: Ralph Lauren 7” Canvas
Weaver. ANTIQUED LEATHER: Ralph Lauren Antiqued Leather Stippler Brush,
Ralph Lauren Antiqued Leather Fitch Edge Brush.
For best results, a satin or semi-gloss base-coat is recommended. If applying
over a freshly painted surface allow final basecoat to dry at least 24 hours
before applying glaze. Faux Technique Glaze may be used to achieve a variety
of faux finish techniques. It can be applied and distressed by a wide variety of
tools and materials, including: synthetic and combination bristle brushes;
foam or woven roller covers; artists brushes; sponges; lint free rags; chamois
cloth; and combing and graining tools. It is recommended to practice on a
test panel to perfect your technique before applying on the wall.
Clean-Up & Care
Clean hands and tools with warm, soapy water. Wipe up spills with a damp
cloth. Freshly glazed surfaces may be gently washed after 30 days with a mild
nonabrasive, non-oily, cleanser and water. Avoid harsh, abrasive cleaners.
Repainting Your Walls – If in the future you wish to paint over the glaze, simply
re-prime and apply your new wall treatment in technique, Unique Finish or latex
paint.

Specifications
Colors: Translucent Tinting Base
Finish: Satin, 6 – 20 units @ 60 degrees
Clean-up Solvent: Soap & water
Density: 8.69 lbs/gal (1.04 kg/L)
VOC: 2.76 lbs/gal (331 g/L)
Solids: Volume: 15% +/- 1% Weight: 18% +/- 1%

Practical Coverage:
Apply at 400 - 800 sq. ft/gal (10 - 20 m2/L). Actual coverage may vary depending on substrate and application
method. Coverage varies from 400 to 800 sq. ft. per gallon relative to the technique being performed. This
product will remain wet and workable for approximately 20 minutes depending on temperature and humidity. Glaze dries
to touch in 60 minutes.

Flash Point: None
Flame Spread Rating: Class A (0-25) over non-combustible surfaces
Dry Time: 77°F (25°C) & 50% RH – Workable up to 20 minutes
To touch: 60 minutes
To recoat: 4 hours

Composition
Acrylic Resin
Titanium Dioxide and Extender
Pigments
Not manufactured with lead or
mercury containing materials
Read Label and Material Safety Data Sheet prior
to use.